 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
2013 1¢ WDDO-001
2013 1¢ WDDO-002 Description: Extra thickness shows on the letters of LIBERTY and also on the date. “Notches” show on the bottom left of the ERTY in LIBERTY and the bottom left of the two and one in the date. Die Markers: Obverse: A strong die gouge protrudes from the rim just to the right of the N of IN. Several small die gouges protrude from the rim above the letters in GOD. Reverse: A short die gouge extends ESE from the rim above the O in OF. A die scratch runs from SSW to NNE in the field above the ribbon north of the T in CENT. Submitted By: Ronald Traino Cross References: Coppercoins: 2013P-1DO-003
2013 1¢ WDDO-003 Description: Extra thickness shows on the letters of LIBERTY and also on the 20 in the date. Very strong “notches” show on the bottom left of the ERTY in LIBERTY. Die Markers: Obverse: A small die gouge (dot) can be found to the right of the bottom of the chin. Reverse: A small die gouge can be found between the centers of the 2nd and 3rd stripes on the shield. Submitted By: Joseph Koelling Cross References: Coppercoins: 2013P-1DO-006
2013 1¢ WDDO-004 Description: Strong extra thickness shows on the letters of LIBERTY. Light extra thickness shows on the date. A close CCW spread shows on WE TRUST. Die Markers: Obverse: None significant. Reverse: A die crack and small die chips run along the top of the left side of the shield. Submitted By: Tanaka Davis Cross References: None known
2013 1¢ WDDO-005 Description: Strong extra thickness shows on the letters of LIBERTY. Light extra thickness shows on the date. Die Markers: Obverse: Die pitting can be found to the right of the bottom of the E in WE. Reverse: A die crack runs along the top of the left side of the shield. A die chip can be found at the top of the shield north of the first U in PLURIBUS. A die gouge (dot) can be found in the field to the right of the top tip of the shield and south of the O in OF. Submitted By: Brian Allen Cross References: Coppercoins: 2013P-1DO-005
2013 1¢ WDDO-006 Description: Extra thickness shows on the ERTY of LIBERTY where it is best seen on the upper left of the Y. Die Markers: Obverse: A die crack runs from SSW to NNE through the hair to the left of the upper ear. Reverse: A die crack runs along the top of the left side of the shield. A die crack runs north from the P in PLURIBUS to the top of the shield. Submitted By: Brian Allen Cross References: None known
2013 1¢ WDDO-007 Description: Extra thickness shows on LIBERTY where it is best seen on the vertical bars of the letters increasing ion strength from left to right. Die Markers: Obverse: A small die gouge (dot) can be found just above the L in LIBERTY. Reverse: A die crack runs along the top of the left side of the shield. Submitted By: Brian Allen Cross References: None known
2013 1¢ WDDO-008 Description: Strong extra thickness shows on the date and light extra thickness shows on LIBERTY and TRUST. Strong notches show on the upper and lower 1 in the date. Die Markers: Obverse: None significant. Reverse: A die crack runs along the top of the left side of the shield. Submitted By: Dean M. Hengst Cross References: None known
2013 1¢ WDDO-009 Description: Extra thickness shows on LIBERTY where it is best seen on the vertical bars of the letters increasing in strength from left to right. Light extra thickness shows on the date. Die Markers: Obverse: None significant. Reverse: A die gouge touches the top of the banner north of the right side of the T in CENT. Submitted By: Joseph Koelling Cross References: None known
2013 1¢ WDDO-010 Description: Strong extra thickness shows on the date. Notches show on the lower left of the 2 and the 1 in the date. Light notching shows on the upper TY in LIBERTY. Die Markers: Obverse: A light die scratch runs NE from the lower right of the Y in LIBERTY. Reverse: A die crack runs along the top of the left side of the shield with small die chips north of the L in PLURIBUS. Submitted By: Joseph Koelling Cross References: None known
2013 1¢ WDDO-011 Description: Strong extra thickness shows on the date. Notches show on the lower left of the 2 and the 1 in the date. Notching shows on the lower left of the ERTY in LIBERTY. Die Markers: Obverse: None significant. Reverse: A die crack runs along the top of the left side of the shield with a large die chip north of the LU in PLURIBUS. Submitted By: Joseph Koelling Cross References: Coppercoins: 2013P-1DO-008
2013 1¢ WDDO-012 Description: Extra thickness shows LIBERTY and slightly on the date. Notching shows on the lower left of the ERTY in LIBERTY. Die Markers: Obverse: None significant. Reverse: A die crack runs along the left side of the top of the shield. Submitted By: Stephen Young Cross References: None known
2013 1¢ WDDO-013 Description: Strong extra thickness shows LIBERTY and the date. Light extra thickness shows on IGWT. Notching shows on the upper left of the ERTY in LIBERTY. Die Markers: Obverse: A small die gouge can be found near the rim to the left of the R in TRUST. Reverse: A die crack runs along the left side of the top of the shield north of E PLU in E PLURIBUS UNUM. Submitted By: Aaron Laramee Cross References: None known
2013 1¢ WDDO-014 Description: Moderate extra thickness shows LIBERTY. Notching shows on the lower right of the RTY in LIBERTY. Die Markers: Obverse: A small die gouge (dot) can be found above the bowtie. Reverse: A die crack runs along the left side of the top of the shield with die chips north of the U, R, and B in PLURIBUS. Submitted By: Alfonso Lopez Cross References: None known
2013 1¢ WDDR-001 Description: Strong extra thickness shows on the lower letters in OF AMERICA and the designer’s initials LB and JFM. Distortion shows on the incuse letters of EPU. Die Markers: Obverse: None significant. Reverse: Some die cracks and die chips can be found on the left side of the top edge of the shield. Submitted By: Joseph Koelling Cross References: Coppercoins: 2013P-1DR-001, CONECA: 2-R-VIII
This is the ICA of AMERICA on a normal coin. Compare it to the doubled die in the previous photo.
This is the JFM on a normal coin. Compare it to the doubled die in the previous photo.
2013 1¢ WDDR-002 Description: Strong extra thickness shows on the lower letters in USA with the strongest spread on the right side of the reverse. Strong extra thickness also shows on the designer’s initials LB and JFM. Notches can be seen on the lower left corners of the letters in ONE CENT. Distortion shows on the incuse letters of EPU. Die Markers: Obverse Stage A: A die gouge can be found to the left of the lower U in TRUST. A die crack runs NNW from the front of the eyebrow into the front of the forehead. Obverse Stage B: Same as Stage A. Reverse Stage A: A light die crack runs along the top left edge of the shield. Reverse Stage B: Some die cracks and die chips can be found on the left side of the top edge of the shield. Submitted By: Stage A: Joseph Koelling, Stage B: Dennis C. Wells Cross References: Coppercoins: 2013P-1DR-002, CONECA: 1-R-VIII
This is the JFM on a normal coin. Compare it to the doubled die in the previous photo.
2013 1¢ WDDR-003 Description: Extra thickness shows on the designer’s initials LB and some distortion shows on the incuse letters of EPU. Die Markers: Obverse: None significant. Reverse: A die gouge can be found to the left of the lower E in EPU. A die scratch runs from NW to SE starting above the E in EPU. Submitted By: Jacob Himes Cross References: None known
This is the LB on a normal coin. Compare it to the doubled die in the previous photo.
2013 1¢ WDDR-004 Description: Extra thickness shows on the designer’s initials JFM and AMERICA. Die Markers: Obverse: A small die gouge (dot) can be found to the right of the R in TRUST. Reverse: A die chip can be found south of the R in PLURIBUS. Submitted By: Chris Freda Cross References: None known
2013 1¢ WDDR-005 Description: Moderate extra thickness shows on the designer’s initials LB and light extra thickness shows on the designer’s initials JFM. Die Markers: Obverse: None significant. Reverse: A die crack can be found on the top left of the shield north of the UR in PLURIBUS. Submitted By: Chris Hurley Cross References: None known
| ||
